Ethernet
|
Originally known as Alto Aloha Network, Ethernet is a widely used local-area network (LAN) protocol originally created by Xerox PARC in 1973 by Robert Metcalfe and others (U.S. Patent # 4,063,220). Being the first network to provide Carrier Sense Multiple Access / Collision Detection (CSMA/CD), Ethernet is a fast and reliable network solution that is still widely used today. Below is a listing of different standards of Ethernet and additional information about each of them. Ethernet II / DIX / 802.3 Ethernet II is a revised version of Ethernet rewritten by with Digital Equipment Corp, Intel and Xerox. Ethernet II, also known as DIX, (Digital, Intel, and Xerox) and 802.3. Fast Ethernet / 100BASE-T / 802.3u Fast Ethernet is also referred to as 100BASE-T or 802.3u and is a communications protocol that enables computers on a local-area network to share information with one another at rates of 100 million bits per second instead of the standard 10 million BPS. Fast Ethernet works over Category 5 twisted-pair wiring. There are two available types of 100BASE-T standards. The first standard known as 100BASE-T utilizes CSMA/CD. The second standard, known as 100VG-AnyLAN or 802.12, is similar to the other standard; however, it utilizes a different type of Ethernet frame to send its data. 100BASE-T is available in three different types of cable technologies:
Ethernet SNAP Ethernet SNAP is short for Ethernet SubNetwork Access Protocol and is a type of Ethernet protocol that enabled old and new protocols to be encapsulated in a Type 1 LLC. Gigabit Ethernet / 1000BASE-T / 802.3z / 802.ab Gigabit Ethernet is also known as 1000BASE-T or 802.3z / 802.3ab is a later Ethernet technology that utilizes all four copper wires in a Category 5 (Cat 5 & Cat 5e) capable of transferring 1 Gbps 10 Gigabit Ethernet / 802.3ae 10 Gigabit Ethernet is also known as 802.3ae is a new standard that supports 10.000 Gb/s. 1000BASE-CX A copper cable gigabit Ethernet standard that is no longer used. This standard has been replaced by 1000BASE-T. 1000BASE-LX A fiber optic gigabit Ethernet standard that operates over single-mode fiber. 1000BASE-SX A fiber optic gigabit Ethernet standard that operates over multi-mode fiber, with typical distances of up to 550 meters (1804 feet) Ethernet adapter Ethernet adapter is a term used to describe an Ethernet network card used to connect a desktop computer to a network. If you are looking for network adapter drivers, you can find them through our network drivers page. |